Fiber Tensioner Technical Specifications
|
| Applications: |
-rugged and high
speed filament winding of composites
-treating and handling graphite fibers
-Unwinding DuPontTM KEVLAR
® fiber and other Aramid fibers
-optical fiber / fiber optic processing
-processing and handling wires of any gauge down to 1/2 mil or smaller
-handling and processing very delicate fibers made of any type material
-filter winding and filter manufacturing
-extremely accurate, very fast to very slow fiber processing |
| Maximum Speed: |
-700 ft/min take-up (unlimited) to
over +1,200 ft/min |
| Tension Ranges: |
-changeable (full scale) tension
ranges from: 50 grams to 20 +pounds |
| Tension Adjustment: |
-from 0% to 100% of the
"full scale" tension range |
| Minimum Tension: |
-lowest tension achieved is 1/2 gram
at 1000 feet per minute |
| Maximum Tension: |
-highest tension is limited to 65 inch
pounds (without special options) |
| Dynamic Deviation: |
-constant payout/take-up 0.3% of full
scale (+ 0.15%) |
| Dynamic Error: |
-payout or take-up + 1%
of full scale |
| Sensor Accuracy: |
-0.09% of full scale |
| Tension Command: |
-manual or remote 0 to 10 VDC = 0
to 100% of full scale range
-may be interfaced to winder computer, controller or PLC |
| Power Requirements: |
-120 VAC 50 HZ to 60 HZ
- current determined by number of units |
| Chuck or Mandrel: |
-standard: air operated, 3"
O.D.
-others available on request |
Front
Page
